See why the UTS-1 is a game changer for Alex from Bevelish Creations
Invisible Wireless Charging
Powered by patented Intelligent Power Communication™ Technology (IPC)
US patent No. 10,862,719
Easy on your Battery Health
Daisy chain Option
auto-shut off when fully charged
Safe, reliable, Rugged
no damage installation
Easy on your battery health
one year warranty
DOES NOT WORK THROUGH
See how the UTS-1 is being used for your industry
Safer and more reliable than ever
Intelligent Power Communication Technology™ (IPC)
Kew Lab's patented IPC™ technology is what makes the UTS-1 is the worlds most reliable and safest long distance Qi wireless charger for both your furniture and phone.
The technology allows for constant two way communication of vital charging commands between your phone and charger and is the first of its kind that ensures long distance Qi wireless charging is as safe and reliable for your phone battery health as traditional wireless charging pads.
Fast and easy installation
Built in wireless charging in minutes
NO power tools, NO drills, No professional labour needed.
Using just the screws or double sided tape provided you can have a sleek invisible wireless charging station in your home or office in minutes!
Want to change your charging point or sell your table? Simply unscrew and you won't be trying to sell a table with a massive hole in it like the competition.
Versatile long distance charging
Up to 1 inch charging distance
The UTS-1 charges through surfaces of between 10-25mm (0.39"-1.0") with ease and safety. It is the worlds only furniture wireless charging with precision distance changing switch to keep the charging responsive to your positioning and ensure your phone is receiving the correct power requirements.
Clean up your desk in style
Mark your table discreetly or as you please with our selection of large and small stickers in grey and white provided in each unit.
works through all non metallic materials
Get a Wireless Charging countertop
Have you got wires running all over your kitchen table or wish you had some kind of built in charging to stop worrying about water and cleaning when you're trying to get a quick charge?
The UTS-1 can be installed as an under counter wireless charger in the kitchen to add charging through quartz countertops, as well as granite, marble and other stones.
Items to consider before choosing:
- The thin and thick UTS-1 version's will depend on the thickness of your table - please measure your table and choose appropriately. if you are able to reduce your surface thickness, the thin version will be more efficient than the thick version, as wireless charging efficiency is higher at shorter ranges.
- Do you have an iPhone 12/13?
- iPhone 12/13 have use the MagSafe magnetic connection system which affects wireless charging performance when the distance between the phone is greater - for best results, please work to our 'Thin' specification surfaces.
- Camera Module thickness?
- Phone's camera modules add additional thickness. Devices with large cameras like iPhone 12 Pro Max, 13 Pro, 13 Pro Max, Samsung S21 Ultra 5G will increase the offset distance from the table and you will benefit more from choosing the thin version.
- Please only choose the correct thickness version for the dimensions you are able to create. For example - the thick version (0.7"-1.0") will not work on a table within the 'thin' parameters (0.39"-0.66"). This is because the standard unit is too powerful for short range charging. The unit will not turn on if this happens.
The UTS-1 is compatible with iPhone 12 and MagSafe designs up to 20mm (0.8"). iPhone 12/13 Pro/Max compatibility and performance may be reduced due to additional camera module thickness. We recommend choosing the 'thin' version for these models.
The presence of magnets in the iPhone 12/13 series creates more interference with our charging signal meaning the overall charging distance needs to be reduced to 10-20mm (0.39" - 0.80") to improve compatibility.
MagSafe iPhone charge times can vary significantly depending on camera module dimensions, placement accuracy and additional MagSafe Case usage. All MagSafe iPhone models enter a slower charging mode once the battery level exceeds 80% due to battery and software limitations set by Apple. A combination of these conditions may result in devices not being fully charged to 100% after a full overnight charge.
For best charging results please charge without a MagSafe case as this further increases magnetic interference and charging distance.
Support.Apple.com states the following:
- When charging a non-MagSafe Qi-compatible device with a MagSafe Charger, power is reduced and charge times may be slower than on a typical Qi charger.
- If your iPhone is connected to both a MagSafe Charger and power via a Lightning port, your iPhone will charge via the Lightning connector.
- As with other wireless chargers, your iPhone or MagSafe Charger might get slightly warmer while your iPhone charges. To extend the lifespan of your battery, if the battery gets too warm, software might limit charging above 80 percent.
- Please ensure the power adapter is plugged in all the way.
- If No 1. does achieve a solid light - please unplug and re-plug in the power cable to the unit.
- Please plug in the charger to a single point power (not a multi-plug extension cable) if it is not already so and check again.
- A flashing LED is therefore an electrical system fault error( please see LED indication section (Page 12) on the user instructions.
- If you have a phone case, it is flat and does not contain any metal, centrally located magnets, card holders, pop sockets or kickstands.
- Ensure your phone is aligned as centrally as possible.
- Check if your phone is Qi wirelessly charging enabled.
- Check your sticker position through recalibration.
- Check your table thickness is within the stated performance range.
25mm (1.0”). Thicker cases can also cause longer recognition time and therefore longer time to beep. Recalibrate if necessary to improve sticker position or center your device on the sticker more accurately to get a better alignment.
Yes – if you would prefer or need to use the charger without the audio confirmation buzzer system, you are able to turn it off. However, without the audio confirmation, your phone is not necessarily charging just through the charging indication on your screen. If you choose to use the device without the buzzer, please ensure your alignment and setup is correct and accurate.
- To disable the buzzer.
- Switch your height toggle switch to calibration mode and switch back to your original height position and listen for the number of audio beeps
- Repeat again to disable or enable depending on preference.
Different phone models have different battery sizes and charging profiles therefore take different amounts of time to charge, with large batteries especially taking longer. Charging speeds may also slow at ≥80% in IOS models due to Apple software requirements designed to limit battery deterioration during wireless charging.
The UTS-1 recognises IOS charging signals and corresponds by adapting charging speeds until your device requests more power. Please try turning OFF ‘Optimised Battery Charging’ in your ‘Settings’.
Charging speeds will also vary depending on the surface thickness. Thicker surfaces will reduce charging efficiency due to the greater distance the charging signal needs to travel.
If problems persist - please reach out to [email protected] for further help.
INCLUDED IN THE BOX
User manual, wire clips, installation templates, UTS-1, 36w power adaptor, stickers, screws, double sided tape (pre-positioned)
12V 3A DC adaptor included (12V 5A DC adaptor for daisy chain connection)
Intelligent Power Communication™ (IPC)
Apple Samsung Fast Charge
Qi Wireless Charging
Product dimensions and weight
18.2 x 12.2 x 2cm (7.17" x 4.8" x 0.79")
30W output power.
Apple 7.5W Fast Charge
Samsung 9W Fast Charge,
Qi standard 5W normal charger
UL, CE, FCC, KR, JP
Saw a video about this product and the company saying how good the product and company was. This was true about both. I used a test board with it hooked to. Worked as it was described. I made a nice platform, and we use it all the time. I recommend it to everybody it talk to. Good instructions, easy to fallow.
Ordering was great and delivery were great but my UTS1 wont work under 17mm timber top or under 17mm stone bench top. Disappointed as I was reading great reviews but hasn't worked for my situation.
We recently purchased a new house where we were putting new countertops in. Because of this and some minimal knowledge of charging pads, I started searching to find something I could install in the new counters for wireless charging. I wanted to prevent the clutter of always having a charging cord plugged in on the counter. I found the UTS-1! During the process of having my new counters fabricated, I provided the fabricator with the template provided on the website, and they milled me out two spaces underneath the counter so that the width of the quartz was within the tolerance required by the product. I ordered and received my order quickly. I had to reach out and work with tech support as I was having issues getting my phone to pick up the charger, and we found out that I had accidentally received the wrong product. I was quickly given a return authorization, and new product was sent out. The second item I received I installed and calibrated extremely quickly! This is amazing! I have so many friends asking about it, and I am sending them your way! I also am probably going to buy some additional product for other places in the house! Thanks again!
I love the concept of not having cords and just have any surface turn into an invisible charger. Have said that, this charger unfortunately didn’t work to all my needs, as my countertop wasn’t within the correct distance range to work with both my older iPhone and iPhone 12 and up cause Apple doesn’t play well with others. I’m sad about that. But I want to give a positive review to the seller who worked with me giving me technical support and trying to make it work over the phone and emails. And this to me shows how serious and professional this company is. So even when it didn’t work for me, I really would referred and try again if they finally find a way around Apple.
Very good support, helped to choose a model, advised how best to do the milling.
Charging is just unreal! This is really the best gadget in the house! He makes me happy every day.
No more wires, no more chargers. Only purity.
The quality of the charger is very good, the power supply is also of good quality. Feels like a good quality item.
There are no extraneous noises or vibrations. It works without being noisy.
The box was made to order according to my drawing.
The thickness of the top plate is 18 mm, milling is 8 mm, 10 mm of thickness is left.
The drawer was made 5 cm shorter so that the power supply could be placed at the back.
Works great with Samsung Galaxy S10, S9+, S7 Edge.
All phones are in Spigen cases.
Yes, the charger is expensive, but the quality that is here, it is definitely worth the money!
I recommend the charger!